Strainer designed to remove rust, scale and other debris from the pipeline
Hotline: +84 906 803 393
Product detail
-
Product codeStrainers - Spirax Sarco
-
APPLICATIONSStrainer designed to remove rust, scale and other debris from the pipeline
Fig 12 SG Iron Strainer
The Fig 12 is an SG iron screwed Y-type strainer. The standard stainless steel screen is 0.8 mm perforations. As options, other perforations and mesh sizes are available as well as monel screens. The strainer cap can be drilled and tapped for blowdown and drain valves if required
Fig. 34 Carbon Steel Strainer
The Fig 34 is an integrally flanged Y-type strainer designed to remove rust, scale and other debris from the pipeline. It is produced from carbon steel, ASTM material.
Fig 37 SG Iron Strainer
The Fig 37 is an SG iron integrally flanged Y-type strainer. The standard stainless steel screen in the DN15 to DN80 size range is 0.8 mm perforations, in the DN100 to DN200 it is 1.6 mm perforations.
As options other perforations and mesh sizes are available as well as monel screens. The strainer cap can be drilled and tapped for blowdown and drain valves if required.
Technical specifications
-
Product codeStrainers - Spirax Sarco
-
APPLICATIONSStrainer designed to remove rust, scale and other debris from the pipeline
Fig 12 SG Iron Strainer
Standards: This product fully complies with the requirements of the European Pressure Equipment Directive 97/23/EC.
Certification: This product is available with a manufacturers' Typical Test Report. Note: All certification/inspection requirements must be stated at the time of order placement.
Sizes and pipe connections ½", ¾", 1", 1¼", 1½", 2", 2½" and 3" screwed BSP or NPT.
Fig. 34 Carbon Steel Strainer
Standards: This product fully complies with the requirements of the European Pressure Equipment Directive 97/23/EC.
Certification: The product is available with material certification to EN 10204 2.2 as standard and EN 10204 3.1.B for body and cap by order.
Note: All certification/inspection requirements must be stated at the time of order placement.
Fig 37 SG Iron Strainer
Standards: This product fully complies with the requirements of the Indian Boiler Regulations, 1950.
Certification: The product is available a manufacturers' Typical Test Report and IBR Certification. Note: All certification/inspection requirements must be stated at the time of order placement.
Sizes and pipe connections DN15 to DN150 standard flange EN 1092 PN40 and ANSI 150. DN200 standard flange EN 1092 PN25 and ANSI 150.
Tetra Pak provides the Strainers from Spirax Sarco
Tetra Pak provides the Steam separators from Spirax Sarco
Tetra Pak provides the Automatic Pump Trap from Spirax Sarco
Tetra Pak provides the Steam traps from Spirax Sarco
Tetra Pak provides the Strainers from Spirax Sarco
Alfa Laval CB brazed plate heat exchangers provide efficient heat transfer with a small footprint.
APPLICATIONS: HVAC heating and cooling, Refrigeration, Oil cooling, Industrial heating and cooling
Tetra Pak provides the Sanitary Strainer from Alfa Laval
Tetra Pak provides the Strainers from Spirax Sarco
Tetra Pak provides the Strainers from Spirax Sarco
