This Unique SSV Standard is designed for use in a broad range of hygienic applications across the dairy, food, beverage, brewery and many other industries.
Benefits
• Exceptional valve hygiene and durability
• Superiorcleanability – smooth inner valve body without crevices
• Extendedseal life due to the defined seal compression
• Enhancedproduct safety due to the static seal leak detection
• Protectionagainst full vacuum due to the double lip seal
Hotline: +84 906 803 393
Product detail
-
Product codeSSV
-
CAPACITY5,000 l/h – 40,000 l/h
-
APPLICATIONSFormulated dairy products
Note: this product has been renamed, old name: Tetra Almix
Standard design
The Unique SSV Standard is available in a one- or two-body configuration, with easy-to-configure valve bodies, plugs, actuator and clamp rings. The valve can be configured as a shutoff valve with two working ports or as a changeover valve with up to five ports.
To ensure flexibility, the valve seat that sits between the two bodies in the changeover version is provided for assembly. The valve seals are optimized for durability and long service life through a defined compression design. The actuator is connected to the valve body using a yoke, and all components are assembled with clamp rings.
Working principle
The Alfa Laval Unique SSV Standard is operated by means of compressed air from a remote location. The actuator smooths operation and protects process lines against pressure peaks, while directing or diverting fluids. The valve can be controlled using an Alfa Laval ThinkTop®.
Certificates
Authorized to carry the 3A system
Designed for efficient emptying of the drum to minimize waste
Ingredients are supplied in drums (buckets, containers or barrels). To empty the drum as thoroughly as possible, a lance is placed inside the drum and used to suck up the ingredient – enabled by the vacuum in the mixer. This prevents the waste of costly ingredients. Once production is complete, the lance is placed in the CIP station and cleaned in the CIP loop together with the Tetra Pak® High Shear Mixer.
Technical specifications
-
Product codeSSV
-
TemperatureTemperature range: -10°C to +140°C (EPDM)
-
PressureMax. product pressure 1000 kPa (10 bar)
Min. product pressure Full vacuum
Materials
Product wetted steel parts: 1.4404 (316L)
Other steel parts: 1.4301 (304)
External surface finish: Semi-bright (blasted)
Internal surface finish: Bright (polished), Ra < 0.8 μm
Product wetted seals: EPDM
Other seals: NBR
The Unique SSV valve range includes several purpose built valves.
Below are some of the valve models available:
- Reverse acting valve.
- Longstrokevalve.
- Manuallyoperatedvalve.
- Tank Outlet valve.
- Two Step valve.
- Tangential valve.
Van Tuyến Tính Unique RV-ST của Alfa Laval được sử dụng rộng rãi trong các hệ thống yêu cầu kiểm soát chính xác và vệ sinh cao.
Van Tuyến Tính Unique RV-P của Alfa Laval được sử dụng rộng rãi trong các hệ thống yêu cầu kiểm soát chính xác và vệ sinh cao.
Van giảm áp 41-23 của Samson
Van giảm áp DRV7 của Spirax Sarco là một thiết bị quan trọng trong các hệ thống sử dụng hơi nước hoặc khí nén.
Van giảm áp BRV2 của Spirax Sarco là một thiết bị quan trọng trong các hệ thống sử dụng hơi nước hoặc khí nén.
Van giảm áp DP27 của Spirax Sarco là một thiết bị quan trọng trong các hệ thống sử dụng hơi nước hoặc khí nén.
Non-return valve/ Check valve LKC-2 is designed for use in stainless steel pipe installations to prevent reverse flow.
Product Benefits:
- Highly reliable
- Easy to install
- Protection for process equipment
