EN
Safe and reliable process protection from Alfa Laval

Our control and check valves are highly reliable valves used to ensure single directional product flow through process lines.

This provides protection for process equipment that can be affected by reverse flow and prevents pressure surges and/or system shutdown.

 

Contact Us
Hotline: +84 906 803 393

Product detail

  • Product code
    Alfa Laval - LKC-2
  • APPLICATIONS
    Formulated dairy products
 

Working principle

LKC-2 opens when the pressure below the valve plug exceeds the pressure above the plug and the spring force. The valve closes when pressure equalization has been achieved.

A higher counter pressure will press the valve plug against the seat.

 

Standard Design

The valve body is in two parts, assembled by means of a clamp ring and hygienically sealed with a special seal ring. A guide disc and four legs guide the spring loaded valve plug with an O-ring seal.

The valve is available with welding ends for tubes according to ISO and DIN 11850.

 

Safe and reliable process protection

Alfa Laval LKC-2 Non-return valves are highly reliable check valves ensure single directional product flow through process lines. This provides protection for process equipment that can be affected by reverse flow and prevents pressure surges and/or system shutdown.

 

Non-return valve range

The standard range of Alfa Laval LKC-2 non-return valves are constructed of standard 304 or acid-resistant 316L stainless steel. Easy to install, the valves are designed to handle maximum product pressure up to 10 bar and temperatures ranging from -10°C to 140°C (EPDM). For added versatility, these check valves are available with either a semi-bright or polished finish, and a variety of welding ends for ISO or DIN connections.

 

Technical specifications

  • Product code
    Alfa Laval - LKC-2
  • Temperature
    Max. temperature: . . . . . . . . . . . . . 140°C (EPDM)
    Min. temperature: . . . . . . . . . . . . . . -10°C
  • Pressure
    Max. product pressure: . . . . . . . . . . 1000 kPa (10 bar)
 

Construction

The Alfa Laval LKC-2 non-return valve consists of an upper valve body, lower valve body, valve plug, seal ring, and guide disc. The valve body is assembled by means of a clamp and hygienically sealed with a special seal ring. A guide disc and four legs guide the spring-loaded valve plug with an O-ring seal. LKC-2 has welding ends for ISO or DIN connections.

 

Materials

Product wetted steel parts: . . . . . . . . 1.4301 (304) / 1.4404 (316L)
External surface finish . . . . . . . . . . . Bright (Machined Ra 1.6)
Internal surface finish . . . . . . . . . . . . Bright (polished), Ra < 0.8 μm
Product wetted seals: . . . . . . . . . . . EPDM rubber

Options
Product wetted seal rings of Nitrile (NBR) or Fluorinated rubber (FPM).

 
LKC 2 Non return Valve 420868 kB
Related products
Sample valves

Sample valves

Alfa Laval sampling valves make it possible to obtain representative samples of food and beverage, personal care and biopharm products.
Safety valves

Safety valves

Safety valves are used for overpressure or vacuum protection in tank and pipelines. Protects against implosion due to vacuum caused by cold rinsing after hot cleaning; against implosion due to caustic absorbed in CO2 atmosphere/temperature fluctuations or against implosion due to blocking of gas supply during emptying.
Unique Mixproof valves

Unique Mixproof valves

Alfa Laval Unique Mixproof valves enable simultaneous flow of two products or fluids through the same valve without risk of cross-contamination. Their exceptional spillage free operation is compliant with most hygienic standards.
Aseptic Mixproof valve type AMV

Aseptic Mixproof valve type AMV

The Alfa Laval Aseptic Mixproof Valve ensures product safety and provides full protection against the intrusion of harmful microorganisms, even during unwanted pressure spikes. This double-seat mixproof valve is perfect for use in sterile process applications in the food, dairy and beverage industries. Easy to configure, operate, maintain, it reduces the total cost of ownership by up to 45% compared to other aseptic valves.
Double seal valves

Double seal valves

Alfa Laval double seal valves SMP-BC is a hygienic pneumatic seat valve, designed for safety and leak detection when two different products flow through only one valve.
Diaphragm valves

Diaphragm valves

The standard Unique DV-ST UltraPure is designed either for manual operation or for Pneumatic operation. The valve consist of a valve body, diaphragm, handle or actuator.
Constant pressure valve

Constant pressure valve

Alfa Laval CPM maintains uniform inlet or outlet pressure in hygienic process lines for the dairy, food and beverage industries. These regulating valves provide accurate pressure control, safe and reliable performance and excellent cleanability. Control the Pressure of your System
Single seat valves

Single seat valves

Our range of single seat valves consists of large numbers of purpose-designed valve units that are very robust and flexible. They are ideal for use in processes with a high hygiene standard.
Ball valve

Ball valve

Our ball valves are constructed with a full-flow body design, enabling the product to pass through the valve with no restrictions and with a minimal pressure drop. The basic design allows cleaning and product recovery using pigging systems, and they are ideal for use with viscous liquids and liquids containing solid or semi-solid particles. Alfa Laval SBV and Alfa Laval Tri-Clover® designations
Butterfly valve

Butterfly valve

Our butterfly valves are straightforward on/off routing valves with a substantial opening area and low flow resistance. They are an optimal solution in modern processing technology and ideal for use with low and medium-viscosity liquids.

Menu