Hotline: (84.0) 906 803 393
Product detail
-
Product codeSpirax Sarco
-
APPLICATIONSThey are suitable for use on a wide range of fluids for applications in process lines, hot water systems, steam and condensate systems etc
LCV-1
The LCV1 is a bronze lift check valve that shall be installed in horizontal pipe to prevent reverse flow.
Standards: This product fully complies with the requirements of the European Pressure Equipment Directive 97/23/EC.
DCV3
Application: The DCV3 is a compact check valve that prevent reverse flow.
Benefits:
- DCV3 fits between flanges
- Austenitic stainless steel body for aggressive fluids, vapour, acids and alkalines
- Compact design compared to a sving check valve
Technical specifications
-
Product codeSpirax Sarco
-
APPLICATIONSThey are suitable for use on a wide range of fluids for applications in process lines, hot water systems, steam and condensate systems etc
LCV-1
Connection: BSP threaded
Material body: Bronze
Max allowable pressure: 14 bar
Max allowable temperature: 260ºC
Certification: This product is available with certification to EN 10204 2.2. Note: All certification/inspection requirements must be stated at the time of order placement
DCV3
Connection: Between flanges
Material body: 1.4581
Material disc: SS or SS/Viton
Max pressure: 40 bar
Max temperature: 250ºC
Standards: These products fully comply with the requirements of the Pressure Equipment Directive (PED).
Standard shut-off: Standard valves conform to EN 12266 rate E. Valves conforming to EN 12266 rate D are available on request. Soft seated versions meet EN 12266 rate A, providing a differential pressure exists.
Certification: These products are available with a Typical Test Report. The products are also available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement.
Tetra Pak provides the Reducing valves from Samson, 41-23, Direct acting - Large capacity
The seat valves are intended for different media applications such as:
- Cold and hot water
- Air and neutral gases
- Steam
Tetra Pak provides the Reducing valves SRV2 from Spirax Sarco
The regulating valves are intended for different media applications such as:
- Cold and hot water
- Air and neutral gases
- Steam
The regulating valves are intended for different media applications such as:
- Cold and hot water
- Air and neutral gases
- Steam
