This is a specialist area that you can discuss in depth with us to ensure that we satisfy your process monitoring needs.
Control of temperature in various processes.
Hotline: (84.0) 906 803 393
Product detail
-
Product codeWika: Thermometer gauges
-
APPLICATIONSControl of temperature in various processes.
Thermometer diameter 63 mm - Vertical
Application: The Vibronic Level Switch - FTL33 IO-Link is a level limit switch for liquids in storage tanks, agitators and pipes which have to meet particularly high hygiene standards internally and externally.
Benefits
- Easy to install even at points difficult to access due to compact design
- CIP and SIP cleanability ensured
- Available in both Ra<0.8um and Ra<1.5um
- LED indicator showing status
Thermometer diameter 63 mm - Vertical, (complete with thermowell)
Application: The Liquiphant M FTL50H/FTL51H is a level limit switch for use in all liquids - for temperatures of –40 °C to 150 °C. - for pressures up to 64 bar - for viscosity up to 10000 mm2/s - for densities 0.5 g/cm3 or 0.7 g/cm3
The function is not affected by flow, turbulence, bubbles, foam, vibration, bulk solids content or build-up. The Liquiphant is thus the ideal substitute for float switches.
Benefits
- PROFIBUS PA
- No calibration: quick, low-cost start-up
- No mechanically moving parts: no maintenance, no wear, long operating life
Thermometer diameter 101 mm - Clamp
Application:
FTW33: For use where build-up is a problem. Less intrution in the tank due to no vibrating fork.
FTW23: A basic alternative for water based and milk applications
Benefits
- Used together with the Liquiline CM44x transmitter series
- Broad measurement range
- Hygienic design certified by EHEDG and 3-A
- Absolute loop safety thanks to Memosens and unique electrode connection surveillance
- Sterilizable and autoclavable
Technical specifications
-
Product codeEndress + Hauser: Flowmeter, Electro-Magnetic
-
APPLICATIONSFor processes in liquid products, water, CIP solutions, condense water, utility gases, liquid products and fluids without conductivity where high accuracy is essential.
Chlorine - CCS142D
Application: Chloromax CCS142D is the digital, free chlorine sensor for all kinds of water
Benefits
- Long calibration and maintenance intervals
- Easy membrane replacement thanks to prefabricated membrane cap
- Measured values are not affected by conductivity fluctuation
- Sensor can be installed in flow cell CCA250 or in immersion assemblies. Measurement virtually independent of the flow at flow velocities above 30 l/h or ~8 gal/h (CCA250) or above 15 cm/s or ~0.5 ft/s (immersion)
- Maximum process safety through no-contact inductive signal transmission
Nitrate - Viomax - CAS51D
Application: Viomax CAS51D measures nitrate or SAC in drinking water, process water and wastewater applications as well as the utilities sector. Organic load or nitrate in inlet and outlet Determination of CODeq or TOCeq Monitoring, control and optimization of treatment processes Nitrate monitoring in the aeration basin and denitrification stage
Benefits
- Cost-effective - Easy, chemical-free handling is safe, environmentally friendly and saves on operational expenditure
- Extremely fast response time - Measured value processing in the sensor provides reliable real-time process information
- Fast and easy commissioning - Sensor comes precalibrated and preconfigured ex factory
- Perfect adaption to open basins - Fast and flexible sensor positioning with Flexdip CYH112 holder and CYA112 assembly system
Turbidity - ITM-51
Application: Preferred turbidity meter for detection of phase separation like water/milk phase but also for products like cream and whey
Benefits
- Compact front flush sensor
- Temp range -10…130 °C (Up to 140 °C max. 120 min for CIP)
- High reproducibility: ≤ 1 % of full scale
- Selectable output value (%TU, NTU, EBC)
- Measurement range: 200…300.000 NTU equivalent
Tetra Pak provides temperature mesurement from Endress + Hauser.
