Alfa Laval i-CP100 Centrifugal Pump

The Alfa Laval i-CP100 pump is designed for standard duty applications, like pumping CIP (Cleaning In Place) solutions, utilities, water (processing, heating, cooling), washing machines, simple transport duty within working range.

Alfa Laval i-CP100 is suited for use in the food, dairy, beverage and water industries.

 

 

Contact Us
Hotline: (84.0) 906 803 393

Product detail

  • Product code
    Alfa Laval i-CP100 
  • CAPACITY
    Up to 80 m3/h
  • APPLICATIONS
    Any application

 

Standard design

Standard design

The Alfa Laval i-CP100 pump consists of a standard motor, stub shaft, mechanical compression coupling, adaptor, back plate, impeller, pump casing and shaft seal.

The Alfa Laval i-CP100 pump is designed for CIP with emphasis on large internal roundings and cleanable seals.

Alfa Laval i-CP100 has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable legs.

Shaft seals

Shaft seals

The Alfa Laval i-CP100 pump is equipped with either an external single or a flushed shaft seal. Both have stationary seal rings in acid-resistant steel AISI 329 with sealing surface in silicon carbide and rotating seal rings in carbon. The secondary seal of the flushed seal is a long lasting lip seal.

 

Technical specifications

  • Product code
    Alfa Laval i-CP100 
  • CAPACITY
    Up to 80 m3/h
  • Pressure
    400kPa (4 bar).
 

Standard materials

 -Product wetted steel parts: 1.4403 (304L)
 -Other steel parts: Stainless steel 1.4301 (304), surface treated carbon steel.
 -Finish: Blasted (standard) 3A polishing (Ra 0.8).
 -Product wetted elastomers: EPDM (FDA)

 

Min/Max speed

 -Air evacuation: 2800-3600 rpm
 -Pumping product (no air): 900-3600 rpm

Motor

Foot-flanged motor according to the IEC metric standard (EFF II), 2 poles = 3000/3600 rpm. at 50/60 Hz, IP 55 (with drain hole with labyrinth plug), insulation class F.

 

Flushed shaft seal (FSS):

Water pressure inlet: . . . . . . . . . . . . max. 100 kpa (1 bar).
Water consumption: . . . . . . . . . . . . 0.25 -0.5 l/min.

Connections for FSS:
R 1/8" (BSP) external thread.

 
 

Motor sizes

50 Hz:1.5, 2.2, 3, 4, 5.5, 7.5, 11, 15, 18.5 kW
60 Hz:1.75, 2.5, 3.5, 4.6, 6.4, 8.6, 12.5, 17, 21 kW.

 
i CP100 Centrifugal Pump 1 300688 kB
Related products
SolidC- Centrifugal Pump - Alfa Laval

SolidC- Centrifugal Pump - Alfa Laval

Designed to meet the hygienic requirements of the dairy, food and beverage, and personal care industries, SolidC is a standardized centrifugal pump for general applications, intermittent product pumping and CIP duties.
LEMD Liquid ring vacuum pumps

LEMD Liquid ring vacuum pumps

Flowserve SIHI - LEMD liquid ring vacuum pumps are displacement single-stage pumps to handling and exhausting of dry and humid gases, entrained liquid can be handled during normal duty.
LKH - Centrifugal pump- Alfa Laval

LKH - Centrifugal pump- Alfa Laval

The cost-effective LKH pumps are used for evaporation, high-pressure, self-priming and high-purity applications. Alfa Laval SolidC focuses on initial cost and the self-priming MR pump, used for CIP return applications. The UltraPure versions meet requirements in pharmaceutical industries and are supplied with Alfa Laval Q-doc, a documentation package providing transparency of sourcing, production and supply chains, and full traceability of all changes in material, procedures or spare parts.
Alfa Laval i-CP2000 Centrifugal Pump

Alfa Laval i-CP2000 Centrifugal Pump

Alfa Laval i-CP2000 Centrifugal Pump. The Pump for any application!
Alfa Laval MR Pump

Alfa Laval MR Pump

Alfa Laval MR pump is a liquid-ring pump specially designed for pumping liquids containing air or gas. The pump is for use in food, chemical, pharmaceutical and similar industries. The pump is mainly used for CIP-return applications.

Menu