Alfa Laval MR Pump

The MR range of pumps is specifically designed for pumping liquids that contain air or gas.

These pumps are most commonly used for CIP return applications in the food, dairy, beverage and pharmaceutical industries.

 

 

Product detail

  • Product code
    Alfa Laval MR Pump
  • CAPACITY
    Up to 80 m3/h
  • TEMPERATURE
    −10 to +140 C
  • PRESSURE
    Up to 5 bar
  • APPLICATIONS
    CIP return applications in the food, dairy, beverage and pharmaceutical industries.

 

Standard design

Standard design

All product wetted parts, i.e. pump casing, casing cover and impeller are made of acid resistant steel, duplex grade. Seals are made of EPDM rubber.

 

Shaft seals

Shaft seals

On MR-166S, -185S and 200S, the mechanical single seals have stationary seal rings of acid resistant steel, duplex grade and rotating seal rings of carbon.

 

Technical specifications

  • Product code
    Alfa Laval MR Pump
  • CAPACITY
    Up to 80 m3/h
  • TEMPERATURE
    −10 to +140 C
  • PRESSURE
    Up to 5 bar
  • APPLICATIONS
    CIP return applications in the food, dairy, beverage and pharmaceutical industries.

 

Motor

Motor

Standard foot-flanged motor acc. to IEC metric standard 4 pol = 1500/1800 rpm. at 50/60 Hz.
IP55 (with drain holes with labyrinth plug), insulation class F.

The pump is available with both IEC and NEMA standard motors and has CE and  3A certification.

 

Model

Available in 4 models MR 166S,185S, 200S and 300. The range can pump up to 80 m3/Hr and pressure of up to 5.3 bar. The MR features an "External" mechanical seal for maximum hygiene and one seal can fit up to 3 models thus reducing spare parts holding.

 
Related products
Alfa Laval i-CP100 Centrifugal Pump. The Standard Duty Pump
Alfa Laval i-CP2000 Centrifugal Pump. The Pump for any application!
Designed to meet the hygienic requirements of the dairy, food and beverage, and personal care industries, SolidC is a standardized centrifugal pump for general applications, intermittent product pumping and CIP duties.
The cost-effective LKH pumps are used for evaporation, high-pressure, self-priming and high-purity applications. Alfa Laval SolidC focuses on initial cost and the self-priming MR pump, used for CIP return applications. The UltraPure versions meet requirements in pharmaceutical industries and are supplied with Alfa Laval Q-doc, a documentation package providing transparency of sourcing, production and supply chains, and full traceability of all changes in material, procedures or spare parts.